Excellent Comprehensive Properties In Strength Hardness Tungsten
Carbide Inserts
Product Description:
Unground carbide inserts,tips, brazed onto an all-steel body, stay
securely in place ideal for grinding big, clean wood material.We
have a special grade of carbide for stump grinder teeth that
combines both hardness and toughness. If the stump grinder tip is
too tough then it wears out too fast. Our tips last much longer and
are the most cost effective.
Technical Parameter:
Application:
Grade Information:
Santon Grade | Density(g/cm³) | TRS(n/mm²) | HRA | Performance & Applications | ISO Code |
| YT15 | 11.3 | 1650 | 92.0 | Higher wear resistance with a certain impact toughness, Suitable
for semi-finishing of medium chip sections, or finishing of small
chip sections of steel, cast steel, alloy steel. | P10 |
| YT14 | 11.4 | 1750 | 91.5 | High strength, good impact and shock resistance. Suitable for rough
turning, finish milling of carbon steel, and alloy steel during
continuous cutting, and semi-finishing and finishing turning during
interrupted cutting | P20 |
| YT5 | 12.9 | 2200 | 90.5 | Best strength, high impact and shock resistance among W-Co-Ti
alloys, but comparatively lower wear resistance. Suitable for rough
turning, rough planning, and semi-finish planning of carbon steel,
and alloy steel including forgings, stamped parts, and cast iron
surfaces during intermittent cutting. | P30 |
| YW1 | 13.0 | 1710 | 92.5 | Better red hardness, resistant to impact load. A good grade for
general purposes. Suitable for machining of ordinary steel, cast
irons as well as steels hard to be machined such as refractory
steel, high manganese steel, and stainless steel, etc. | M10 |
| YW2 | 12.9 | 1880 | 91.0 | Higher wear resistance and strength, resistant to high impact load.
Suitable for roughing and semi-finishing of ordinary steel, and
cast irons as well as refractory steel, high manganese steel, and
high-grade alloy steel, etc | M20 |
| YG6X | 14.9 | 1890 | 91.5 | Fine grain WC alloy, wear resistance higher than YG6, strength
close to YG6. Suitable for machining chilled alloy cast irons, and
refractory alloy steel, as well as finishing of ordinary cast
irons. | K15 |
| YG6 | 14.9 | 2050 | 90.5 | High wear resistance, better impact and shock resistance. Suitable
for semi-finishing, and finishing of cast irons, non-ferrous metal,
alloys, and non-metallic materials at moderate cutting speed. | K20 |
| YG8 | 14.7 | 2520 | 90.0 | High strength, better impact and shock resistance, but lower wear
resistance and cutting speed. Suitable for roughing of cast irons,
non-ferrous metal, alloys, and non-metallic materials at low speed. | K30 |
packaging:
Feature:
- High quality and stability
- High performance. dimensionally accurate
- Good abrasive and corrosion resistance
- easy to change out
- Long cutting life time
Company Information:
Chengdu Santon Cemented Carbide Co., Ltd is a professional private
company, which consists of producing, selling and developing of
nonferrous metal material such as cemented carbide and tungsten and
molybdenum products, containing special inserts,brazed tips,
cutting tools, also non-standard cemented carbide inserts.
We can manufacture small and large scale carbide products as per
your drawing. Our in house technicians and experts are quite
qualified in this field with over 20 years of experiences. We are a
customer focused, innovative and value driven company which
manufactures and supplies cemented carbide products to their
valuable customers at affordable price.
FAQ:
Q. Are you a manufacturer or a trading company?
A. We are a professional manufacturer with 10 years of experience
of producing and selling carbiede inserts.
Q. What is your main products?
A. Our main products includes cemented carbide plates, strips,
blanks, saw tips, geological and mining bits, brazed tips,
indexable carbide inserts, wear parts,snow plow inserts, tungsten
carbide pins, etc.
Q. what's the payment term?
A. We accept Western union, Onetouch, T/T, and L/C. 30% T/T deposit
and 70% balance before shipment, or against copy of BL, or L/C at
sight.
Q. What about your delivery time?
A. Usually it will take about 25 - 30 days for production.But for
new molds, the lead time may need 10days more to open molds. If you
need the goods urgently, we could try to push for and shorten the
delivery time.
Q. What is your minimum order quantity(MOQ)?
A. No limit for MOQ. For non-standard products, mold fee need to be
paid, but can be refunded later.
Q. What is your warranty?
A. We extend a 100% satisfaction guarantee on all items. if you’re
not completely satisfied with our products ,we’ll replace them or
refund the fee
Q. Where is your market?
A. Our products are popular in Germany, America, Mexico, India,
Russia, Indonesia, Malaysia, Bangladesh, South Africa,etc.
